EKSPOLAN Liquid Glass Coating

Restore aged paint to a deep, glass-like gloss

Liquid Glass Coating is a self-leveling automotive paint restoration coating designed for dull, oxidized, and weathered painted panels. Its polymer/PTFE-based film helps revive depth and gloss while adding a durable protective layer against UV exposure, road grime, light chemical contamination, and everyday wash wear.

Why drivers use it

• Revives faded paint: engineered for older finishes that have lost gloss, depth, and visual clarity.
• Self-leveling finish: flows across the painted surface to help visually reduce light swirl marks, sun spots, and micro-marring.
• Durable protective film: forms an approximately 5-6 micron coating with >6H pencil hardness when properly applied and cured.
• Protection for harsh conditions: resists UV exposure, acids, alkalis, organic solvents, and temperatures from -30°C to +150°C.
• DIY garage application: one 235 mL bottle is designed to cover one full-size sedan or SUV.

What is included

• 235 mL Liquid Glass Coating in aluminum bottle
• 2 round applicator sponges
• 1 pair nitrile gloves
• Application manual

How to apply

1. Wash the vehicle thoroughly with a pH-neutral car shampoo.
2. Decontaminate the paint and degrease the entire painted surface to remove wax, oils, sealants, and residues.
3. Saturate the round applicator sponge with coating and apply evenly in straight lines, panel by panel.
4. Allow the coating to self-level. It begins to stop self-leveling after about 5 minutes.
5. Inspect immediately. Streaks or fisheyes must be corrected with degreaser within 30 minutes; after that, removal requires polishing.
6. Let the vehicle rest indoors for about 12 hours. Avoid washing or touching the paint until fully cured.

Important application notes

• Apply indoors in a dry, wind-free space at 15-30°C with low humidity.
• Wear nitrile gloves and a mask during application.
• Best suited for vehicles over 3 years old with dull, oxidized, or aged paint.
• Not intended for pristine new paint where restoration is not needed.
• Do not use on vinyl wraps, PPF, glass, headlights, plastic trim, or carbon fiber.
• For repainted panels, wait at least 6 months before applying.
• Wait 4 days in summer or 6-7 days in winter before washing.

Technical details

FAQ

Can beginners apply it?
Yes, but this is a DIY coating product that requires careful surface preparation. First-time users should practice on a small area such as a trunk lid or fender before coating the full vehicle.

Will it remove deep scratches?
No. It can help visually reduce light swirl marks and micro-marring, but deep scratches, chips, and severe clear-coat damage require correction before application.

How long does one application last?
When applied correctly and maintained properly, the coating is designed for long-term protection, up to 8 years under suitable conditions.

Can I wax over it?
Yes. Wait at least 30 days before applying wax or sealant over the cured coating.

When can I wash the car?
Wait 4 days in summer or 6-7 days in winter before washing so the coating can fully harden.